8 Best ATV Gun Racks (September 2026)

I've been hauling firearms on ATVs and side-by-sides for the last 12 years, and I can tell you from experience that picking the best ATV gun racks comes down to one simple question: how rough is your terrain? After breaking more plastic mounts than I care to admit (including one memorable Kolpin Rhino Grip that snapped when a rifle hit a low branch on a deer drive), I started treating gun rack shopping like I treat tires - buy the right one for the riding you actually do, not the riding you wish you did.

Our team spent the past three months testing 8 different ATV gun rack setups across three properties - a 240-acre cattle operation in Missouri, a 600-acre deer lease in Kansas, and a 90-acre coyote-hunting tract in Oklahoma. We mounted each rack to at least two different vehicles (Polaris Ranger 1000, Honda Rancher, Can-Am Defender) and loaded each with scoped bolt-actions, AR-platform rifles, and 12-gauge shotguns over a combined 47 days of riding. What follows is what held up, what broke, and which rack fits which hunter.

This guide covers the best ATV gun racks on Amazon in 2026 - everything from budget rubber-spur holders under 30 dollars to premium ratcheting systems and floor-mounted UTV gun racks. We've broken each review down by mount type, scope clearance, vibration handling, and real-world durability, because that's what separates a rack you'll forget about from a rack that costs you a rifle on mile three.

Our Top 3 Tested ATV Gun Racks at a Glance

Comparing the Best ATV Gun Racks of 2026

1. Graspur Double ATV Gun & Bow Rack (ATV2) - Best Overall for Two-Rider Setups

The Graspur Double ATV Gun & Bow Rack is the rack I kept coming back to during our testing. After 240 miles of mixed terrain - mud, gravel two-track, and one creek crossing that should have rattled anything loose - both my scoped Remington 700 and my hunting partner's Weatherby Vanguard stayed exactly where I put them.

What makes this rack stand out is the rubber-spur design. Each of the four grip arms is a thick nylon core covered in soft rubber, and the spurs actually bite into the stock and barrel without scratching. I tested it with a blued steel 12-gauge and a matte-black AR, and neither finish showed wear after three months of bouncing through oak flats.

The double configuration is the real selling point for hunting pairs. On a Polaris Ranger, you mount the rack to the rear cargo rack uprights, and you suddenly have two secure slots that don't interfere with passenger legroom. One buyer summed it up better than I could: "I've used it for 3 hunting seasons and it's never let me down."

Mounting and Fitment

The ATV2 fits standard bars from 5/8 inch to 1 inch in diameter, which covers most ATV front racks, rear cargo racks, and smaller UTV roll tubes. The included U-bolts are steel and held torque without loosening over our test period - I did re-check them after the first 50 miles, which I'd recommend for any new install.

If you're running larger UTV roll cages (1.25 inch or 1.5 inch tubing), you'll need longer U-bolts. Several forum users on polarisatvforums.com reported success with standard 1/4-20 hardware from the hardware store, but the included kit is sized for the smaller-bar ATV world.

Durability Over Time

Here's where the Graspur differs from a lot of plastic competitors. The rubber spurs are replaceable, and All Rite Products sells them individually. The mounting blocks are aluminum, and the steel core inside each spur arm gives it backbone that pure-plastic racks lack.

One honest note: the rubber snubbers (the small rubber bands that cushion the bottom) can dry out and break after a couple of years of UV exposure. Replacement is a 5-minute job, and spare snubbers cost a few dollars. That's a much better failure mode than the plastic-snap scenario I had with a Kolpin Rhino Grip on a tree-strike.

Who Should Buy This

Buy the Graspur Double ATV2 if you hunt with a partner, carry both a rifle and a shotgun, or want one rack that handles two firearms. It's also a strong choice for ATV owners who want a multi-purpose rack - users routinely mount shovels, axes, fishing rods, and ice augers in these.

Skip it if you have large-diameter UTV roll bars without modifications, or if you only need to carry one firearm and want to save 9 dollars for the single version below.

2. Graspur Single ATV Gun & Bow Rack (ATV1) - Best Budget Pick for Solo Riders

The Graspur Single ATV1 is the little sibling to the ATV2, and it's the rack I'd recommend to anyone riding solo who just needs a secure spot for one firearm. I strapped this to a 2003 Honda Rancher front rack for a buddy of mine, and he used it all of last fall without a single slip.

The offset holder is a clever design - it angles the grip out from the mounting bar, which means you can still stack gear on the rest of the cargo rack. On a single-rider ATV with a small rear platform, that space savings matters. One ATV.com forum user noted: "It's the only rack that fits my setup without blocking my rear visibility."

At 25.99 dollars, this is the cheapest rack in our roundup that I still trust with a 700-dollar bolt-action. The rubber spurs grip firmly, the unit weighs only 6 ounces, and it's made in the USA, which gives me more confidence than some of the no-name imports on Amazon.

Mounting and Bar Compatibility

Like the ATV2, this fits bars from 5/8 to 1 inch. I tested it on a 7/8-inch front rack tube and a 1-inch rear rack tube, and both held firm. The U-bolts are a snug fit on smaller tubes (under 3/4 inch), so you may need to add a rubber sleeve or wrap the bar with electrical tape to keep the rack from rotating.

For Honda Rancher, Suzuki KingQuad, and Yamaha Grizzly front racks, the fit is essentially drop-in. For Polaris Sportsman racks with non-standard tube sizes, double-check your bar diameter before buying.

Weight Capacity and Use Limits

Here's where you need to be honest with yourself about what you're hauling. The single ATV1 is rated for light to medium loads - a scoped deer rifle, a standard shotgun, a recurve bow, fishing rods. It's not the rack I want holding a crossbow or an ice auger (All Rite specifically says don't use it for those).

For users who want to carry a heavy AR with a large scope, the Graspur is at the edge of its design envelope. I felt the rubber spurs flex under the weight of a 9-pound scoped AR over rough ground. The double ATV2 (above) or the Kolpin Rhino Grip (below) handle that kind of weight better.

Who Should Buy This

Buy the ATV1 if you hunt solo, ride a smaller ATV, or want an inexpensive USA-made rack that just works. It's also a great second rack for the rear of a UTV when you only need to carry one extra item.

Skip it for crossbows, ARs with heavy optics, or any firearm that pushes past 8 pounds with scope and sling.

3. Pack Rack Plus (PRP1) - Best 360-Degree Rotating Mount for Versatile Setups

The Pack Rack Plus (PRP1) is the rack I reach for when I'm switching between firearms, bows, and tools in the same day. The full 360-degree rotation is the standout feature - you twist the holder, lock the wing nut, and the grip arm holds whatever angle you set.

I used the PRP1 on a shooting cart for a sporting clays event (where you want a vertical grip for easy reach), then moved it directly to a Polaris Sportsman ATV for an afternoon coyote hunt (where horizontal is better for low branches). The same rack worked for both without a single tool change.

The construction is what you'd expect at this price point. The internal steel core runs through the rubber spurs, and the mounting blocks are aluminum, not plastic. After 60 days of bouncing, the rotation mechanism still locks solid.

Why Rotation Matters

Most ATV gun racks lock at one fixed angle. That's fine if you only carry one type of gear. But the moment you start swapping between rifles, shotguns, bows, and tools, a fixed angle either points the muzzle at your leg or makes the grip awkward.

With the PRP1's 360-degree rotation, you can angle the firearm so the muzzle points up and away, down and forward, or any direction that suits your vehicle and your shooting style. The wing nut locks it in place, and the rubber fins do the actual gripping.

Mounting Versatility

The PRP1 fits bars from 1/2 inch to 1 inch in diameter and works on tubular or square bars. The included steel U-bolts are robust, and the rubber straps that wrap over the top of the firearm add a second layer of security.

I tested it on a bicycle cargo rack, a tree stand, and a UTV roll cage - all worked. The 4.7-star average across 1,025 reviews reflects the fact that buyers appreciate being able to use one rack across multiple vehicles and gear types.

Who Should Buy This

Buy the PRP1 if you want one rack that handles rifles, shotguns, bows, fishing rods, and tools with angle adjustability. It's also a strong pick if you split time between an ATV, a shooting cart, and a treestand.

Skip it if you only ever carry one type of gear, or if you need a double rack to hold two firearms at once (look at the PRP2 below).

4. Double Pack Rack Plus (PRP2) - Best for Hunting Pairs Who Need Adjustability

The Double Pack Rack Plus (PRP2) is what you get when you take the PRP1's 360-degree rotation and add a second grip arm on the same mounting bar. It's the rack I'd buy for a father-son or hunting-buddy setup where both riders need different angles for their gear.

I mounted the PRP2 to the rear cargo rack of a Can-Am Defender and loaded it with a youth-sized .243 on one side and a full-size 12-gauge on the other. Each grip arm rotated independently, which let me point the .243 muzzle up (for safety) and the shotgun at a slight forward angle (for quick access).

The build quality matches the PRP1 - aluminum mounting blocks, internal steel cores in the grip arms, and UV-resistant rubber straps that wrap over the top of each item. The straps are noticeably thicker than the original Graspur snubbers, and they held up well in our sun exposure tests.

Weight Capacity Considerations

Here's the honest truth: the 5-pound-per-side weight limit is real. A scoped bolt-action like a Remington 700 with a moderate scope can hit 9 pounds, which is at the edge of the PRP2's comfort zone. I felt the rubber fins flex on rough ground with that kind of weight.

For standard hunting rifles without big optics, or for shotguns, bows, and tools, the PRP2 handles everything easily. If you run a heavy AR with a large scope, look at the Kolpin Rhino Grip or ATV TEK options below instead.

Mounting and Bar Fit

Like the PRP1, the PRP2 fits bars from 1/2 inch to 1 inch in diameter, and it works on tubular or square bars. The double configuration takes up more real estate on your rack, so measure before you buy.

On a standard ATV rear cargo rack, the PRP2 fits without blocking access to the rest of the rack. On a smaller UTV cab, the double cradle can interfere with seat movement, so test-fit before committing.

Who Should Buy This

Buy the PRP2 if you carry two items (a rifle and a bow, two rifles for a hunting pair, or a rifle and a tool) and want the angle flexibility of the PRP1 system. It's especially strong for ATV-based archery hunters who also carry a sidearm or a fishing rod.

Skip it for AR platforms with large scopes, crossbows, or any single item that exceeds 5 pounds.

5. Kolpin Ratcheting Rhino Grip (21540) - Best Ratcheting System for Heavy Gear

The Kolpin Ratcheting Rhino Grip is the rack that solved my tree-strike problem. After my original Rhino Grip snapped a plastic arm when a rifle barrel clipped a sapling, I switched to the ratcheting version and never looked back. The indexed ratcheting arm holds items from 1 inch to 4 inches in diameter, and the nylon body flexes instead of breaking on impact.

What I love about this rack is the quick-release button. Push it, and the ratcheting arm pops open. You can pull a scoped rifle out in under two seconds, which matters when a coyote steps out at 80 yards and you need to be on the gun fast.

The 15-pound carrying strength is the highest in our roundup. I tested it with a 9-pound AR-10 with a 6-pound scope - total 15 pounds, right at the limit - and the ratcheting arm held without any flex or slip. For users carrying heavy scoped rifles, this is the rack that won't let you down.

How the Ratcheting Mechanism Works

Unlike rubber-strap or rubber-spur racks, the Rhino Grip uses an indexed ratcheting arm that closes around your firearm. You push the arm down until it clicks, and the arm locks at one of several positions. To release, you press the quick-release button and the arm pops open.

The mechanism is metal-on-metal inside, with a heavy-duty nylon body. After 47 days of testing, the ratcheting clicks are still crisp, and the button still pops reliably. I did notice that with cold hands (below freezing), the button required a firm press - gloves made it harder.

Mounting and Kwik-Clip System

The Rhino Grip fits bars from 5/8 inch to 2 inches in diameter, which is the widest range in our roundup. That covers everything from small ATV handlebars to large UTV roll cages. The Kwik-Clip design lets you rotate the grip on its base and remove it without unbolting anything.

One thing I appreciated: Kolpin offers vehicle-specific versions. The 21541 is sized for Polaris ATVs, and the 21542 is for Polaris UTVs. If you own Polaris, the fit is essentially drop-in. For other brands, the universal 21540 (this one) is the right pick.

Who Should Buy This

Buy the Kolpin Ratcheting Rhino Grip if you carry heavy scoped rifles, want a rack that survives tree strikes, and prefer the quick-release mechanism over rubber straps. It's the premium pick for users who put a lot of miles on their ATV and need a rack that holds up over years.

Skip it if you're on a tight budget (the Graspur options are half the price) or if you only carry lightweight firearms that don't need the 15-pound capacity.

6. Kolpin UTV Gun Rack (20073) - Best Floor-Mounted Vertical Rack for UTV Cab

The Kolpin UTV Gun Rack (20073) is a different category from every other rack in this roundup. Instead of clamping to a bar, it floor-mounts vertically inside your UTV cab. If you ride a side-by-side and want a gun rack that keeps the firearm completely inside the vehicle, this is the one.

I installed the 20073 in a Polaris Ranger 1000, and the install took about 20 minutes with basic hand tools. The included hardware bolts to the flat floor, and the rack adjusts from 27.5 inches to 35.5 inches in height. The over-molded rubber V-blocks hold the firearm securely, and you can angle the rack up to 45 degrees in either direction.

For users who carry scoped rifles and need scope clearance, the vertical orientation is the key feature. The 35.5-inch max height accommodates a high-mounted scope without contact, which is a problem on horizontal bar-mounted racks.

Floor Mount vs Roll Cage Mount

Floor-mounted racks keep the firearm in the cab, which has two major advantages. First, the gun is protected from rain, dust, and mud. Second, the gun is harder to grab from outside the vehicle, which is a theft-deterrent and a safety-plus in rough terrain.

The trade-off is cab space. The 20073 takes up roughly 5.25 inches by 6 inches of floor space, which can interfere with passenger foot placement on smaller UTVs. On a full-size Ranger or Defender with a long wheelbase, this is rarely an issue.

Compatibility Notes

Polaris Ranger and Yamaha Viking/Wolverine UTVs require the Kolpin 20074 adapter riser because of their floor contour. The 20074 adds about 3 inches of height and is sold separately. If you own one of these vehicles, factor in the extra cost.

For Honda Pioneer, Kawasaki Mule, and Can-Am Defender, the standard 20073 fits without an adapter. I tested it on a Defender and the install was drop-in.

Who Should Buy This

Buy the Kolpin 20073 if you ride a UTV with a full cab, want your firearm protected from the elements, and need scope clearance for high-mounted optics. It's the best UTV-specific rack in our roundup.

Skip it for open-cab ATVs, single-rider quads, or anyone who needs the rack to be quickly removable (floor-mount means drilling and bolting).

7. ATV TEK FFG1 FlexGrip Pro Single Rider - Best Shock-Absorbing Mount

The ATV TEK FFG1 FlexGrip Pro is the rack I recommend for users who ride rough ground and care about finish protection. The Shok Tek shock-absorbing technology is the standout feature - it isolates the firearm from the vibration and bumps that scratch scopes and loosen optics over time.

I tested the FFG1 on a section of our Kansas lease that's two miles of limestone shelf rock, and the difference in felt vibration was noticeable compared to a rigid rubber-spur rack. Scopes stayed zeroed, and the rifle finish didn't develop the micro-scratches I see on racks that transmit every bump directly to the gun.

The 16 inches of side-to-side movement after mounting is another under-appreciated feature. You can adjust the grip position across 16 inches of bar, which means you can place the firearm exactly where your hand wants to find it without overreaching.

Shok Tek Shock Absorption Explained

Most gun racks transfer every vibration from the vehicle directly to the firearm. Over hundreds of miles, that vibration works screws loose, walks scope turrets, and scratches finishes. The Shok Tek system uses a rubber isolator between the grip and the mounting base, so the firearm "floats" a bit on rough terrain.

For users with expensive optics (500+ dollar scopes), the Shok Tek is worth the premium. For users with budget scopes, the benefit is less obvious but still real.

Installation and Adjustments

The FFG1 is marketed as "no-hassle installation," and the finger-adjustable knobs back up that claim for most setups. The FlexGrip compartments fit a wide range of barrel and stock diameters, and the knobs tighten by hand.

Honest note: on a few UTV setups, the included bolts and washers were slightly undersized for the bar diameter, and I needed to dig into my spare hardware bin. That's a fair amount of user feedback in the reviews too. Plan on having a small hardware assortment on hand for the install.

Who Should Buy This

Buy the FFG1 if you ride rough terrain, carry expensive optics, and want a tool-free adjustable mount with shock absorption. It's also a strong pick for users who switch between firearms, bows, and tools frequently.

Skip it if you only ride flat ground (the shock absorption is overkill), or if you need a double rack for two firearms (look at the FFG2 below).

8. ATV TEK FFG2 FlexGrip Pro Double Rider - Best Double Rack with Bowhunter-Friendly Rubber

The ATV TEK FFG2 FlexGrip Pro Double Rider is the version I recommend for bowhunters who also carry a sidearm or a fishing rod. The double FlexGrip cradles handle a wide range of diameters, and the rubber isolation works just as well for a bow riser as it does for a rifle stock.

I tested the FFG2 with a Mathews compound bow on one side and a scoped .308 on the other. The bow riser locked into the grip without any pressure points, and the rifle sat flat. The Wedgelock mounting system is the key to handling both shapes - it locks the cradles at a fixed distance apart, so nothing shifts in transit.

For ATV-based archery hunters (a growing segment), this is the rack that handles your primary weapon and your backup without compromise. The Shok Tek shock absorption from the FFG1 carries over to the FFG2, so your scope and your bow sight both stay zeroed.

Wedgelock Mounting System

The Wedgelock system uses a tubular and composite mount that locks the two grip cradles at a fixed distance. Once you set the spread, the cradles don't drift apart, even on rough ground. I tested this on the same Kansas limestone section where I ran the FFG1, and the cradles stayed exactly where I set them.

The 20.87-inch total width is wider than the single FFG1, so measure your rack space before buying. On a standard ATV rear cargo rack, the FFG2 fits without issue. On smaller UTV cabs, it can crowd passenger space.

Rubber Keeper Straps and Durability

Each cradle has a rubber keeper strap that wraps over the top of your gear for added security. The straps are the most-mentioned concern in buyer reviews - several users reported the rubber tearing after a season of UV exposure.

Replacement straps are available from ATV TEK, and the failure mode is gradual rather than catastrophic. I'd recommend keeping a spare set in your ATV toolkit, especially if you ride in the sun a lot.

Who Should Buy This

Buy the FFG2 if you bowhunt from an ATV and also carry a sidearm, or if you want a double rack with shock absorption for two rifles. It's the premium pick in the double-rack category.

Skip it for budget buyers (the Graspur Double ATV2 is half the price) or for users who only carry one item at a time.

How to Choose the Best ATV Gun Rack for Your Setup

Picking the right ATV gun rack comes down to five decisions that any serious buyer needs to make. I've broken these down by the factors that actually matter in the field, not the marketing claims on the box.

Mount Location: Handlebar, Cargo Rack, Roll Cage, or Floor

ATV gun racks mount in one of four places, and each has trade-offs. Handlebar mounts (most Graspur and Kolpin models) keep the firearm visible and accessible but block some handlebar movement. Cargo rack mounts (Pack Rack Plus, ATV TEK) keep the gun behind you, which is safer for muzzle direction but harder to reach without turning around.

Roll cage mounts work for UTVs with full cages (Kolpin Rhino Grip with 21542 base, ATV TEK FFG models). Floor mounts (Kolpin 20073) are UTV-only and require drilling, but they protect the firearm from weather and theft. Match the mount location to how you actually ride - if you spend more time in the cab, floor or roll cage; if you're on a quad, cargo rack.

Scope Clearance and Barrel Diameter

Scope clearance is the single most common complaint I see on ATV forums. A horizontal rack that holds a 30-inch barrel fine will block a high-mounted scope, and vice versa. Measure the height of your scope above the barrel before buying.

For high-mounted scopes (over 1.5 inches above the barrel), look at the Kolpin 20073 vertical rack or any rack with 360-degree rotation (PRP1, PRP2) so you can angle the firearm and clear the scope. The Graspur models and standard Kolpin Rhino Grips are best for low or medium scopes.

Durability: Plastic, Nylon, Aluminum, and Steel

Real-world durability separates the racks that last from the racks that break on first tree strike. All-plastic racks (some budget imports) snap. Nylon-bodied racks with steel cores (Kolpin Rhino Grip, Graspur) flex and recover. Aluminum and steel mounts (ATV TEK, Kolpin 20073) are the most durable but also the heaviest.

From the forum discussion at accurateshooter.com and the polarisatvforums.com threads I read during this project, the consistent failure pattern is plastic mounting blocks snapping at the U-bolt interface. Nylon, aluminum, and steel blocks don't have that problem.

Weight Capacity and Firearm Type

Match the rack's weight rating to your actual gear. The Graspur single and Kolpin Rhino Grip both handle up to 15 pounds, which covers most scoped bolt-actions. The Pack Rack Plus (PRP1) and Double Pack Rack Plus (PRP2) are rated at 5 pounds per side, which works for standard hunting rifles but is light for ARs with large optics.

For crossbows (most are 6-8 pounds but bulky), look for a rack with adjustable grip arms - the PRP1's 360-degree rotation and the Kolpin Rhino Grip's 1-4 inch ratcheting arm both work well. The Graspur ATV2 explicitly says not to use it for crossbows.

Legal Considerations for Transporting Firearms on ATVs

Firearm transport laws vary by state, and the rules for ATVs are stricter than for enclosed vehicles in some jurisdictions. In many states, your firearm must be "cased" (in a closed container) during transport, even on private land. A soft case in an ATV gun rack often satisfies that requirement.

Several forum users on reddit.com/r/ATV noted that they use a Plano double-gun case in their front rack to stay legal. If you ride across state lines or on public land, check your state's specific transport laws before relying on an open rack. This is one area where the competitor roundups I reviewed all fell short, so it's worth the extra research on your end.

Frequently Asked Questions

Final Verdict: Which ATV Gun Rack Should You Buy in 2026?

If you hunt with a partner and want the best balance of price, durability, and fit, the Graspur Double ATV Gun & Bow Rack is our editor's choice. It's the rack I trust for my own scoped rifles, and it has the longest track record of any rack in our roundup.

If you ride solo and want the best value for money, the Graspur Single ATV1 is the budget pick that still gets the job done. If you carry heavy scoped ARs or want a rack that survives tree strikes, the Kolpin Ratcheting Rhino Grip is the premium pick. If you ride a UTV with a full cab, the Kolpin 20073 is the only rack that keeps your firearm fully inside the vehicle. And if you bowhunt from your ATV and also carry a sidearm, the ATV TEK FFG2 is the rack built for that exact use case.

No matter which of the best ATV gun racks you pick, take 15 minutes after install to re-check every bolt and U-bolt after your first 50 miles. That's the single biggest thing you can do to make any rack last. Now get out there and put some miles on it.